PHAAAAAT! thats awesome good job jarred!Quote:
Originally Posted by Jarred
Printable View
PHAAAAAT! thats awesome good job jarred!Quote:
Originally Posted by Jarred
WHU DERE?:D can't wait to see it at teh BBQ
http://www.vwwatercooled.org.au/newf...t=12671&page=5
Shamless plug j:
Nice work Jarred awesome stuff however you need a custom number plate:D
Oh yeah... Now u need to put the plate up higher :D
I bet he is to busy blwing of Comodores to care
hahah yea, the plates a bit low. I only realised after I had drilled the holes to fit in on, so yea, I'll fix it up some time. as for custom plates; I was goign to but a) i'm broke and b) i didn't know what to get, I thought about WEBERD or something like that, i've only got one, and it's not that big as is anyways. so yea. whu will have to dhu for now.
nah what are you on about, they are custom WHU (= woo!) and 178 is how much power i'm puttin down! :rolleyes: hahaha
As for blowing off commmys, not yea, I havn't had the chance! but I'll probably go down to st kilda for a drive on sat night/dusk, mainly cause I can, so I'm sure I'll get a chance for too to blow some rice n whores, or well try at least!
I will be at the BBQ on sunday! looking very much forward to it.
as for the car itself. I whacked some new spark plugs in the other day. which turned out to not be such a good idea, as they need to be turned into place auctually! ha, who would have thought! no seriously. did the plugs, and still in the process of tuning it up, havn't done the timing yet, cause I couldn't be bothered, but I'm occasionally fiddling with the air/fuel and the idle, to try an "feel" whats best.
As you can tell,. I'm pretty happy right now. I think I might go to the car wash. cause I can.
also at this point I'd like to thank everyone who help me with this, mainly josh (golfman) who put a fair bit of wrench time, and a bit of knowledge. Other honerable mentions to Tim (golfworx) and Pete Jones for years of knowledge and advice that they've passed on. and Thanks to everyone else who commmented and helped and etc. this is by no means the end of the project (it's a mk 1, the work never ends), but yea, I still have some more plans, and no doubt will come across some more problems no doubt! Or i might just get another project... hmm.. :D
peace love respect and rubbin dubbin to all.
Jarred
Yeah. Wooo Hooo they are custom plates. Thought that as soon as I saw em. :D
Move the back one up though.
Nice to see a Mk1 back on the road, not lurking in a garage. Congrats Mate.
What are you trying to say? We're all trying our darn hardest here!! :)Quote:
Originally Posted by Golf Loon
Anyway, my 4 door can beat up your 4 door. j:
Well done, Jarred ;) Great to see it on the road :)
Since the Project and resto section has been dead for a bit now, I though I'd resurrect my thread with a bit of an update on what's been going on and stuff, and a bit of getting ready for Nats!
So, enjoy! :D
I think we left of with a working engine. well that decided to stop working.
What's missing from this picture??
http://www.vwwatercooled.com.au/foru...004Copy8-1.jpg
If you geussed a valve, you'd be correct! two points.
Now where could that pesky valve have gotten too..?
http://www.vwwatercooled.com.au/foru...03Copy12-1.jpg
Oh, there, IN the piston! ha. who would have thought!
http://www.vwwatercooled.com.au/foru...01Copy14-1.jpg
http://www.vwwatercooled.com.au/foru...1Copy141-1.jpg
Awaiting a new heart:
http://www.vwwatercooled.com.au/foru...01Copy15-1.jpg
http://www.vwwatercooled.com.au/foru...02Copy14-1.jpg
http://www.vwwatercooled.com.au/foru...007Copy4-1.jpg
I'm sure we were deep in thought, about something relavent!
http://www.vwwatercooled.com.au/foru...009Copy2-1.jpg
Like father like son! Thanks dad for the help
I've got the "new" engine in, just another 1600, and a few other things that I don't have photos of, and I won't be anytime soon either! I'm planning on a few surprises for Nats, so you'll have to wait till then! ;)
enjoy.
Nice socks. j:
Glad to see progress, don't lag or you won't get it finished!